Installation Instructions for Vinyl Lettering Applications

MVC-800F.JPG (128415 bytes) After cleaning vehicle, use Isopropyl or Denatured Alcohol to get rid of any soap residue.

MVC-802F.JPG (129552 bytes) Tape graphic into position. Get it close to where the final placement should be.

MVC-804F.JPG (130625 bytes) Measure distance - First, Left to Right

MVC-803F.JPG (131475 bytes) Then Measure for proper height.

MVC-805F.JPG (133004 bytes) Cross tape the graphic to form a "HINGE"

MVC-806F.JPG (129298 bytes) Peel back 1/2 of graphic to the taped hinge. Cut away release liner.

MVC-807F.JPG (133563 bytes) Using a back and forth over-lapping motion, using a squeegee, with equal pressure, press graphic into place.

MVC-809F.JPG (131382 bytes) Peel back other half of graphic.

MVC-810F.JPG (131668 bytes) Repeat the same application using the squeegee to apply final portion of graphic.

MVC-811F.JPG (131538 bytes) Remove release liner by pulling straight back on itself. Do not pull release liner away from graphic.

MVC-812F.JPG (132083 bytes) With "LUCK" you should have a perfectly positioned graphic. Use same measurements to duplicate procedure on the other side.

 

Any questions please call us, Toll Free 1-800-543-8746